The shot blasting machine mainly consists of four components:
① Shot blasters generally use high-speed rotating impellers to eject projectiles in a certain direction under high centrifugal force. During the working process, some shot blasters can swing at a certain angle or move up and down.
② Bullet collection, separation, and transportation system.
③ A load-bearing body that continuously runs and flips the casting during shot blasting cleaning.
④ Dust removal system.
Sandblasting room: No need for deep pits (or no pits), low infrastructure cost, and short construction period.
The shot blasting cleaning machine equipment is mainly composed of a shot blasting machine, wear-resistant rubber ring belt, twisting dragon, lifting, separator, feed conveyor, dust collector, and cleaning machinery combination.
1. The unevenness of the working face is less than 20mm; No standing water and relatively dry; Slope<25 °
2. Environmental temperature: -20 ℃~60 ℃; The surface temperature of the steel plate is above 3 ℃ above the dew point
3. Humidity: a. The relative humidity during shot blasting on the steel surface shall not exceed 90%
b. The relative humidity during concrete shot blasting shall not exceed 95%
4. Altitude: 0-3000m; Do not operate in rainy or snowy weather